Avalla X-95 - General Operating Instructions; Empty Water Tank; Continuous Drainage

7En
General operating instructions
Empty water tank
Continuous drainage
Cleaning the air lter
01. Switch off the
power to the
unit.
02. Remove the
water tank
from the back
and drain.
03. Return the
water tank
and continue
operation.
01. Make sure
power is off.
02. Remove the air
intake cover.
03. Remove the air
lter.
04. Vacuum with
a soft head
attachment.
05. Replace the air
lter then air
intake cover.
The unit can operate for prolonged periods,
bypassing the water tank.
Note: the water tank must be installed or the
machine will not run.
Caution: Automatic ‘water tank full’ shut
down is disabled when using continuous
drainage.
01. Make sure the power is off.
02. Attach the drainage hose to the drainage
outlet.
03. Make sure the end of the drainage hose
leads to a suitable drain where overow is
not a risk.
X-95, X-125 and X-150
X-95, X-125 and X-150
X-200
X-200
i Check and clean the air lter regularly to maintain maximum air ow .