To Next PageTo Next Page
Need help?Do you have a question about the Avalon Avanti PS and is the answer not in the manual?
Details on model, serial number, and keeping the bill of sale for warranty purposes.
Key safety rules covering smoke, fuel, electrical, maintenance, and operational best practices.
Safety regarding electrical connections, grounding, and mobile home installation requirements.
Proper fuel use, maintenance reminders, and fire safety precautions.
Details on heating capacity, burn rate, burn time, and hopper capacity.
Physical dimensions, weight, electrical ratings, and power requirements of the stove.
Approved fuel types and the heater's EPA compliance status.
Initial checks, permits, insurance notification, and contents of the packing list.
Various installation configurations like residential, alcove, horizontal/vertical vent, and outside air.
Guidance on planning the installation, including sketching plans and checking dimensions.
Requirements for stove placement, clearances from combustibles, and floor protection.
Detailed clearance requirements for straight vent installations through walls or vertically.
Clearance specifications for corner installations, both through-wall and vertical.
General rules for pellet vent installation, clearances, and prohibited connections.
Guidelines on maximum venting distances, heights, and the use of different vent diameters.
Specifies approved vent types (Type "L", Type "A") and how to seal vent sections.
Requirements for approved vent caps, downturns, and termination clearances from house features.
Specific installation rules for mobile homes, including bolting, grounding, and room restrictions.
Guidelines for connecting outside air for combustion, including kit recommendations and termination rules.
Specific dimensions and clearances required for installing the stove in an alcove.
How to adjust the restrictor for optimal airflow and flame characteristics.
Diagram and explanation of a direct through-the-wall vent installation.
Diagram and explanation for an interior vertical vent installation.
Diagram and explanation for retrofitting a Class A chimney.
Diagram and instructions for installing the stove in a fireplace.
Crucial safety warnings before operating the stove, emphasizing manual adherence.
Identifies the location of the control panel, thermostat, and restrictor on the stove.
Instructions for initial startup, including curing paint and priming the auger.
Step-by-step guide on how to properly load pellets into the hopper.
Explains the Manual and Auto modes of operation for the heater.
Detailed instructions for operating the stove in Manual mode, including starting and shutting down.
How to adjust the heat output level while the stove is operating.
Instructions for operating the stove using thermostat control in Auto mode.
How to set the thermostat for desired room temperature and stove operation.
Guidance on adjusting the restrictor for optimal airflow and flame characteristics.
How to control and adjust the fan speed for optimal performance.
Explanation of the stove's automated start-up sequence and its purpose.
Explains indicator lights and fault codes for troubleshooting.
How the stove behaves during and after power outages.
Routine daily checks and tasks for optimal stove performance.
How to visually inspect the flame for proper burning characteristics.
Troubleshooting steps if pellets accumulate excessively in the burn pot.
Identifying and addressing clinkers in the firepot for efficient burning.
Step-by-step instructions for cleaning the firepot, including safety warnings.
Recommended maintenance tasks to be performed every 10 bags of pellets.
How to clean the heat exchange tubes for efficient heat transfer.
Procedures for cleaning the hopper and optional gold finishes.
Instructions on safely opening the stove door for maintenance using the door latch tool.
How to effectively sweep flyash into the ashpan for improved efficiency.
Instructions for checking and properly disposing of ashes from the ashpan.
How to clean the stove's glass door for better visibility and heat output.
Extensive maintenance procedures recommended annually or every two tons of fuel.
Steps for cleaning the vertical section of the exhaust duct.
Steps for cleaning the horizontal section of the exhaust duct.
Instructions for cleaning the exhaust blower motor, blades, and housing.
How to inspect and clean the pellet vent system for obstructions and buildup.
How to identify and fix air leaks in seals for optimal performance.
A list of available replacement parts with their part numbers.
Describes the typical sounds produced by various components during operation.
Critical warning about the safety label and its importance for proper installation and use.
Table detailing required clearances for different installation configurations.
Details warranty coverage for parts and labor for the first two years.
Details warranty coverage for parts and labor for years three through five.
Details warranty coverage for parts only for years six and seven.
Lists conditions and exclusions that may void the warranty.
Instructions for installing the optional thermostat and connecting it to the heater.
Information on installing and using the optional remote thermostat.
Instructions for installing the optional log set for decorative purposes.
Instructions for installing the optional gold grill trim.
Instructions for installing the optional gold door.
Alphabetical listing of topics and their corresponding page numbers for quick reference.
Details on model, serial number, and keeping the bill of sale for warranty purposes.
Key safety rules covering smoke, fuel, electrical, maintenance, and operational best practices.
Safety regarding electrical connections, grounding, and mobile home installation requirements.
Proper fuel use, maintenance reminders, and fire safety precautions.
Details on heating capacity, burn rate, burn time, and hopper capacity.
Physical dimensions, weight, electrical ratings, and power requirements of the stove.
Approved fuel types and the heater's EPA compliance status.
Initial checks, permits, insurance notification, and contents of the packing list.
Various installation configurations like residential, alcove, horizontal/vertical vent, and outside air.
Guidance on planning the installation, including sketching plans and checking dimensions.
Requirements for stove placement, clearances from combustibles, and floor protection.
Detailed clearance requirements for straight vent installations through walls or vertically.
Clearance specifications for corner installations, both through-wall and vertical.
General rules for pellet vent installation, clearances, and prohibited connections.
Guidelines on maximum venting distances, heights, and the use of different vent diameters.
Specifies approved vent types (Type "L", Type "A") and how to seal vent sections.
Requirements for approved vent caps, downturns, and termination clearances from house features.
Specific installation rules for mobile homes, including bolting, grounding, and room restrictions.
Guidelines for connecting outside air for combustion, including kit recommendations and termination rules.
Specific dimensions and clearances required for installing the stove in an alcove.
How to adjust the restrictor for optimal airflow and flame characteristics.
Diagram and explanation of a direct through-the-wall vent installation.
Diagram and explanation for an interior vertical vent installation.
Diagram and explanation for retrofitting a Class A chimney.
Diagram and instructions for installing the stove in a fireplace.
Crucial safety warnings before operating the stove, emphasizing manual adherence.
Identifies the location of the control panel, thermostat, and restrictor on the stove.
Instructions for initial startup, including curing paint and priming the auger.
Step-by-step guide on how to properly load pellets into the hopper.
Explains the Manual and Auto modes of operation for the heater.
Detailed instructions for operating the stove in Manual mode, including starting and shutting down.
How to adjust the heat output level while the stove is operating.
Instructions for operating the stove using thermostat control in Auto mode.
How to set the thermostat for desired room temperature and stove operation.
Guidance on adjusting the restrictor for optimal airflow and flame characteristics.
How to control and adjust the fan speed for optimal performance.
Explanation of the stove's automated start-up sequence and its purpose.
Explains indicator lights and fault codes for troubleshooting.
How the stove behaves during and after power outages.
Routine daily checks and tasks for optimal stove performance.
How to visually inspect the flame for proper burning characteristics.
Troubleshooting steps if pellets accumulate excessively in the burn pot.
Identifying and addressing clinkers in the firepot for efficient burning.
Step-by-step instructions for cleaning the firepot, including safety warnings.
Recommended maintenance tasks to be performed every 10 bags of pellets.
How to clean the heat exchange tubes for efficient heat transfer.
Procedures for cleaning the hopper and optional gold finishes.
Instructions on safely opening the stove door for maintenance using the door latch tool.
How to effectively sweep flyash into the ashpan for improved efficiency.
Instructions for checking and properly disposing of ashes from the ashpan.
How to clean the stove's glass door for better visibility and heat output.
Extensive maintenance procedures recommended annually or every two tons of fuel.
Steps for cleaning the vertical section of the exhaust duct.
Steps for cleaning the horizontal section of the exhaust duct.
Instructions for cleaning the exhaust blower motor, blades, and housing.
How to inspect and clean the pellet vent system for obstructions and buildup.
How to identify and fix air leaks in seals for optimal performance.
A list of available replacement parts with their part numbers.
Describes the typical sounds produced by various components during operation.
Critical warning about the safety label and its importance for proper installation and use.
Table detailing required clearances for different installation configurations.
Details warranty coverage for parts and labor for the first two years.
Details warranty coverage for parts and labor for years three through five.
Details warranty coverage for parts only for years six and seven.
Lists conditions and exclusions that may void the warranty.
Instructions for installing the optional thermostat and connecting it to the heater.
Information on installing and using the optional remote thermostat.
Instructions for installing the optional log set for decorative purposes.
Instructions for installing the optional gold grill trim.
Instructions for installing the optional gold door.
Alphabetical listing of topics and their corresponding page numbers for quick reference.
General| Brand | Avalon |
|---|---|
| Model | Avanti PS |
| Category | Pellet stove |
| Language | English |
