6. Operations
6.1. Initial State
i. In factory initial state default password is “123456” to open the door.
ii. In factory initial state any fingerprint can open the door.
iii. After setting administrator information, the initial password “123456” will be
deleted automatically.
6.2. General Rules of Operations
i. Press ‘*” for clear key or back key. When entering password, click to clear
previous input, long press to clear the input.
ii. Press “#” for confirm key or menu function key
iii. Press “9” + “#” for Doorbell key
iv. Swipe panel to activate keypad
6.3. Enter Administrator mode
i. Swipe panel to activate screen
ii. Enter “*” + “#”
iii. Enter Administrator Information (password, fingerprint, or card)
iv. Enter function management
To Next Page