7.3.5.4. Hijack Alarm
When someone forces you to open the door, you may enter a pre-set hijack
unlocking method to send an alarm through the smart door lock.
Set a fingerprint or password for hijack alarm
i. In the app tap the door lock in the device list to open the device’s
control panel
ii. Tap the button in the upper right corner to enter the device editing
page
iii. Tap member management. Associate A with a username and mark A as
a hijacking alarm. This helps locate the hijacked person.
iv. Use A to unlock the door. A hijacking alarm will be sent to the app’s
Message Centre.
To Next Page
Loading...