Avanti DG 2401 C - User Manual

IMPORTANT - PLEASE READ AND FOLLOW
✓ Before beginning, please read these instructions completely and carefully.
✓ Do not remove permanently affixed labels, warnings, or plates from the product. This
may void the warranty.
✓ Please observe all local and national codes and ordinances.
✓ Please ensure that this product is properly grounded.
✓ The installer should leave these instructions with the consumer who should retain
for local inspector's use and for future reference.
✓ The electrical plug should always be accessible
Installation must conform with local codes or in the absence of codes, the National Fuel
Gas Code ANSIZ223.1 - Iatest edition. Electrical installation must be in accordance with the
National Electrical Code, ANSI/NFPA70 - latest edition and/or local codes. IN CANADA:
Installation must be in accordance with the current CAN/CGA-B149.1 National Gas
Installation Code or CAN/CGA-B149.2, Propane Installation Code and/or local codes.
Electrical installation must be in accordance with the current CSA C22.1 Canadian
Electrical Codes Part 1 and/or local codes.
INSTALLATION IN MANUFACTURED (MOBILE) HOME: The installation must conform with
the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [for-
merly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part
280)] or, when such standard is not applicable, the Standard for Manufactured Home
Installations, ANSI/NCSBCS A225.1, or with local codes where applicable.
INSTALLATION IN RECREATIONAL PARK TRAILERS: The installation must conform with
state or other codes or, in the absence of such codes, with the Standard for Recreational
Park Trailers, ANSI A119.5.
Installation of any gas-fired equipment should be made by a Iicensed plumber. A manual
gas shut-off valve must be installed in the gas supply line ahead of the appliance in the gas
stream for safety and ease of service.
If an external electrical source is utilized, the appliance, when installed, must be electrical-
ly grounded in accordance with local codes or, in the absence of local codes, with the
national Electrical Code, ANSI/NFPA 70.
GAS RANGE
for residential use only
DG 2401 C
• USERS OPERATING INSTRUCTIONS
IMPORTANT - PLEASE READ AND FOLLOW
This range is supplied with a protective film on
steel and aluminium parts.
This film must be removed before installing/using the appliance.
ENGLISH ESPAÑOL

Summary

Important Safety and Installation Guidelines

Installation Compliance and Grounding

Details installation requirements, national/local codes, and essential grounding for safe appliance operation.

Specific Installation for Mobile Homes & Trailers

Critical Safety Warnings and Gas Leak Protocol

Anti-Tip Device Importance

Highlights the risk of appliance tipping and the necessity of installing the provided anti-tip device.

Procedure for Smelling Gas

Critical steps to follow if a gas leak is detected to prevent fire, explosion, and injury.

User Manual: Operating and Servicing Instructions

General Appliance Operation Rules

Electrical Grounding Safety

Stresses the critical importance of proper electrical grounding for user safety.

Precautions for Safe Appliance Use

Unpacking and Handling Precautions

Safe Operation and Hazard Avoidance

Details safe usage, handling hot parts, supervising children, and preventing fire risks.

Top Burner Operation Guide

Adjusting Gas Burner Flow

Safe Gas Burner Ignition Steps

Provides step-by-step instructions for safely igniting the gas burners.

Gas Oven Usage and Temperature Control

First-Time Oven Use and Cleaning

Oven Thermostat and Temperature Settings

Oven Ignition and Cooking Best Practices

Safe Oven Burner Ignition

Step-by-step instructions for safely igniting the oven burner, including safety precautions.

Preheating and Oven Cooking Tips

Broiling and Oven Interior Lighting

Broil Burner Ignition and Operation

Instructions for lighting the broil burner, emphasizing safety during operation.

Advanced Broiling Techniques

Broiling Setup and Grill-Pan Use

Guidelines for proper broiling setup, including shelf placement and correct grill-pan usage.

Appliance Cleaning and Maintenance Guide

General Cleaning Preparations

Essential pre-cleaning steps, safety precautions, and general advice for maintaining the appliance.

Cleaning Specific Surfaces and Parts

Burner and Grid Maintenance

Oven Door Removal Procedures

Oven Door Removal - Type A

Oven Door Removal - Type B

Essential Dos and Donts for Usage

Key Usage Guidelines and Prohibitions

Summarizes crucial recommendations and safety prohibitions for operating the appliance.

Safety During Maintenance and Servicing

Emphasizes safety protocols during maintenance and the requirement for qualified service personnel.

Avanti DG 2401 C Specifications

General

Brand	Avanti
Model	DG 2401 C
Category	Ranges
Language	English