Avantree Oasis Plus 2 - Setting up Your TV

User Manual
13
EN
OASIS PLUS 2
( FOR OPTICAL CONNECTIONS ONLY )
If you connected to your TV via the optical OUT or “OPT OUT”
port, you’ll need to congure your TV settings before you’ll
receive audio.
STEP 1
Using your TV’s remote control, press the SETTINGS button and
navigate to the AUDIO tab within the settings menu. (Please
note that there may be dierences in the setting names
depending on your brand of TV).
STEP 2
Proceed to AUDIO OUTPUT and select “OPTICAL OUT / DIGITAL
OUT”. Many TVs will do this automatically; skip this step as
needed.
STEP 3
Set Audio Output format to “PCM / STEREO” ON or “DOLBY”
OFF.
Setting Up Your TV
Sound
Audio Out Optical Out
Digital
Audio
Format
PCM/Stereo
Dolby - OFF
or