Need help?Do you have a question about the Avantree Oasis Plus and is the answer not in the manual?
General| Bluetooth Version | 5.0 |
|---|---|
| Supported Profiles | A2DP, AVRCP |
| Frequency Response | 20Hz - 20kHz |
| Audio Codec Support | aptX, SBC |
| Range | Up to 50m / 164ft |
| Input | Optical, RCA |
| Power Supply | 5V/500mA |
| Battery Life | N/A (No battery, requires external power) |
| Output | Optical, AUX, RCA |
Switches between transmitter (TX) and receiver (RX) modes, or bypass.
Selects low latency or high-definition audio priority.
Initiates Bluetooth pairing mode for headphones or speakers.
Switches audio inputs or toggles voice prompts on/off.
Adjusts volume or controls playback in receiver mode.
Instructions on connecting the Oasis Plus to a power source.
Guides on choosing the correct TV audio output for connection.
Step-by-step guide to connect using the optical audio cable.
Instructions to ensure the OPT indicator is lit after connection.
Step-by-step guide to connect using the 3.5mm AUX audio cable.
Guide to connect using RCA ports via the provided adapter.
Instructions to ensure the AUX indicator is lit after connection.
How to put the Oasis Plus into Bluetooth pairing mode.
Guide to activate pairing mode on your Bluetooth headphones.
Steps to connect the Oasis Plus with your headphones.
To Next Page
