12
EN
User Manual
OASIS PLUS
Now that your Oasis Plus is all set up, you can connect your
headphones to the transmitter.
STEP 1
First, power everything on.
STEP 2
For rst time use, the Oasis Plus will enter PAIRING MODE
automatically. For subsequent use, put your Oasis Plus into
PAIRING MODE by pressing & holding the button until the
"TX" LED ashes green and white alternately.
STEP 3
Put your Bluetooth headphones / speakers into PAIRING mode.
STEP 4
Keep the Oasis Plus & your device close together and wait for
5-10s until they connect. Once connected, the “TX ” indicator
and the device connection indicator’s “A” will turn a solid white.
NOTE 1: Most cases where your device & the transmitter fail to connect
happen because the device is not properly placed into PAIRING MODE.
Double check that your device is successfully in PAIRING MODE (typically
indicated by an LED indicator's alternate red & blue ashes). For more
details, please refer to your device's online user manual.
Connecting Your Headphones
TRANSMITTER MODE
To Next Page
Loading...
