AC power specifications
The following table describes the AC power specifications for the Ethernet Routing Switch 2500
Series.
Models: 2526T 2550T 2526T-PWR 2550T-PWR
Input current: Maximum 0.8 A Maximum 2.9 A
Input voltage (rms) 100-240 VAC at 50-60 Hz 100-240 VAC at 50-60 Hz
Power consumption: Maximum 96 W Maximum 350 W
Thermal rating: 327 Btu/h maximum 500 Btu/h maximum
Connecting AC power
Required cable: AC power cord that meets the requirements of your local electrical code. Refer
to
Table 1: International power cord specifications on page 16 for plug specifications.
Table 1: International power cord specifications
Country and plug description Specifications Typical plug
Continental Europe
• CEE7 standard VII male plug
• Harmonized cord (HAR marking on
the outside of the cord jacket to
comply with the CENELEC
Harmonized Document HD-21)
220 or 230 VAC
50 Hz
Single phase
U.S./Canada/Japan
• NEMA5-15P male plug
• UL-recognized (UL stamped on
cord jacket)
• CSA-certified (CSA label secured
to the cord)
100 or 120 VAC
50-60 Hz
Single phase
Before You Begin
16 Regulatory Information for the Avaya Ethernet Routing Switch 2500 Series November 2010
To Next Page
Loading...
