Need help?Do you have a question about the Avaya 4524GT-PWR and is the answer not in the manual?
General| Power over Ethernet | Yes |
|---|---|
| PoE Budget | 370W |
| Switching Capacity | 48 Gbps |
| Forwarding Rate | 35.7 Mpps |
| Jumbo Frame Support | Yes |
| Manageable | Yes |
| VLAN Support | Yes |
| Layer 3 Routing | Yes |
| Product Type | Network Switch |
| MAC Address Table Size | 8K entries |
| Features | Quality of Service (QoS), IGMP Snooping, Port Mirroring |
| Dimensions | 44 cm x 25.4 cm x 4.4 cm |
| Weight | 4.5 lbs |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -40 to 70 °C |
| Humidity | 10% to 90% (non-condensing) |
| Ports | 24 x 10/100/1000Base-T |
Explanation of the different command modes available in the Command Line Interface (ACLI).
Feature to replace a unit in a stack while retaining its configuration.
Information about PoE switches and their ability to power network devices over Ethernet.
Explanation of LLDP, its function in advertising capabilities and discovering topology.
Limiting user access by creating and maintaining passwords.
Authenticating users through a dedicated network resource using the RADIUS protocol.
Procedure to change the software version running on the switch using ACLI.
Setting port speed and duplexing using ACLI.
Initiating and displaying results for a cable diagnostic test using Time Domain Reflectometer (TDR).
Mechanism for time synchronization using SNTP, accuracy within 1 second.
Customizes advertised capabilities and controls advertised auto-negotiation process.
Configuring switch domain name servers to resolve domain names to IP addresses.
Enabling and configuring Link Layer Discovery Protocol (LLDP) using ACLI.
To Next Page