To Next PageTo Next Page
Need help?Do you have a question about the Avaya ERS 4850GTS-PWR+ and is the answer not in the manual?
General| Manageable | Yes |
|---|---|
| Power over Ethernet | Yes |
| PoE Budget | 740 W |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 131 Mpps |
| Jumbo Frame Support | Yes |
| Jumbo Frame Size | 9216 bytes |
| Form Factor | Rack-mountable |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Product Type | Switch |
| Layer | Layer 3 |
| Ports | 48 x 10/100/1000 + 4 x shared SFP |
| MAC Address Table Size | 32000 entries |
| Dimensions | 440 x 440 x 44 mm |
| Humidity | 5% to 95% non-condensing |
| Power Supply | Internal |
Describes the CLI command for configuring traffic-profile filter sets.
Provides a practical scenario for configuring traffic-profile filter sets.
Discusses issues from insufficient hardware resources during filter set installation.
Details commands for setting interface shaping parameters.
Explains how to create egress queue shapers for ports.
Presents practical examples of configuring QoS meters and shapers.
