To Next PageTo Next Page
Need help?Do you have a question about the Avaya ERS 4826GTS and is the answer not in the manual?
General| Model | ERS 4826GTS |
|---|---|
| Enclosure Type | Rack-Mountable |
| RAM | 256 MB |
| Flash Memory | 128 MB |
| MAC Address Table Size | 16K entries |
| Jumbo Frame Support | 9216 bytes |
| Routing Protocol | RIP, OSPF |
| Remote Management Protocol | SNMP, Telnet, HTTP, HTTPS, CLI |
| Features | VLAN support, QoS, IGMP snooping, DHCP relay |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1w, IEEE 802.1s, IEEE 802.1X |
| Power Supply | Internal |
| Voltage Required | 100-240 VAC, 50/60 Hz |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -40 to 70 °C |
| Humidity | 10% to 90% (non-condensing) |
| Ports | 24 x 10/100/1000Base-T, 2 x 10GigE SFP+ |
How to configure classifier criteria and actions using the 'qos traffic-profile classifier' CLI command.
A practical demonstration of traffic-profile filter set configuration and application.
Diagnosing and resolving filter set installation failures due to insufficient resources.
Steps to configure interface shaping parameters on ports.
Procedure for setting up egress queue shapers for specific ports and queues.
Demonstrates configuration examples for meters and shapers, including port and queue shaping.
