Avaya ERS 4850GTS User Manual

Ethernet Routing Switch
45XX, 48XX, 55xx, 56xx, 59xx
Virtual Services Platform
7000
Engineering
> Ethernet Routing Switch Simplified
QoS Configuration Using Traffic
Profile Filter Sets Technical
Configuration Guide
Avaya Networking
Document Date: September 2015
Document Number: NN48500-624
Document Version: 4.0

Avaya ERS 4850GTS Specifications

General

Model	ERS 4850GTS
Form Factor	Rack-mountable
Switching Capacity	176 Gbps
Jumbo Frame Support	Yes
Routing Protocol	OSPF, RIP
Remote Management Protocol	SNMP, RMON, CLI
Features	VLAN support, Quality of Service (QoS), Layer 3 switching, IPv6 support, Access Control List (ACL) support, IGMP snooping
Operating Temperature	0 °C to 50 °C
Storage Temperature	-40 to 70 °C
Humidity	10% to 90% (non-condensing)
MAC Address Table Size	32K

Summary

Filter Set Anatomy

Filter Set Essentials

Traffic-Profile Filter Set Usage

Traffic-Profiles Filter Set Configuration

Details the CLI command syntax for configuring traffic-profile filter set elements.

Displaying Traffic-Profile Filter Set Data

Covers commands to display filter set configurations, associations, and statistics.

Traffic-Profile Filter Set Usage Example

Provides a practical example of identifying and prioritizing network management traffic.

Troubleshooting

Resource Exhaustion

Discusses issues related to insufficient precedence, filter, meter, or counter resources.

Classifier Block Formation

Explains how to combine compatible classifier elements into blocks to save resources.

Interface Capabilities

QoS Egress Queue Shaping

Configuring QoS Interface Shaper

Describes how to configure interface shaping parameters using CLI commands.

Configuring QoS interface queue shaper

Details the process for creating egress queue shapers for specific ports and queues.

ERS 4000 switch: UDP/TCP Port Range to remark traffic and dst-IP to Meter traffic

ERS 4000 switch: UDP/TCP Port Range using meter to remark traffic

Port Shaper

Per Queue Shaper