Need help?Do you have a question about the Avaya ERS 3526T-PWR+ and is the answer not in the manual?
General| Model | ERS 3526T-PWR+ |
|---|---|
| Jumbo Frame Support | Yes, up to 9216 bytes |
| Power over Ethernet (PoE) | Yes, 802.3af/at |
| MAC Address Table Size | 16K |
| VLANs Supported | 4094 |
| Power Supply | Internal |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 10% to 90% (non-condensing) |
| Layer 2 Features | Spanning Tree (STP, RSTP, MSTP), Link Aggregation (LACP), VLAN |
| Layer 3 Features | Static Routing, RIP v1/v2 |
| Quality of Service (QoS) | 8 priority queues per port |
| Security Features | Access Control Lists (ACLs), 802.1X authentication, port security, DHCP snooping |
| Management | Web-based, SNMP, CLI |
| Type | Managed Ethernet Switch |
Explains ACLI modes, prompts, and navigation between command modes.
Details stacking capabilities, considerations, and Auto Unit Replacement (AUR).
Setting, clearing, and defaulting IP addresses, subnet masks, and gateways.
Configuring boot parameters, stack modes, and Auto Unit Replacement (AUR).
Enabling/disabling ports, naming, setting speed, duplex, and flow control.
Downloading and installing new software images and diagnostic loads.
Safely shutting down, cancelling, and reloading switches, including remote device management.
Configuring basic settings and remote access via Enterprise Device Manager.
Configuring stack units, Energy Saver (AES), and PoE using EDM.
To Next Page
