Avaya AG2330 - Page 41

Procedure steps
1. Enter configuration mode:
configure terminal
2.
Configure a VLAN with IP address:
vlan database
vlan 10
exit database
interface vlan vlan10
ip address 47.80.235.163 255.255.255.0
exit vlan
3.
Configure the SR4134 Ethernet interface to connect with the existing network:
interface ethernet 0/1
switchport
switchport pvid 10
spanning-tree
spanningtree-disable
portfast
exit spanning-tree
exit ethernet
4.
Configure the Mediation Server module interface:
interface servmod 6/1
switchport
switchport pvid 10
spanning-tree
spanningtree-disable
exit spanning-tree
exit servmod
5.
Configure the CS 1000 Node IP as the next hop SIP server for the SR4134 Media
Gateway, as well as the SIP transport protocol.
sip-ua
sip-server ipv4:47.80.235.100:5060
transport tcp
exit
6.
Specify the IP address of the bound Media Gateway interface.
voice service voip
sip
bind all ipv4:47.80.235.163
exit 2
SR4134 configuration example with OCS and CS 1000
Avaya AG2330/SR2330/SR4134 Quick Start Guide August 2013 41