6. Use the show platform mainboard CLI command to check the memory modules status.
In the command output, the lower RAM slot is referred to as Memory socket #1, and the
upper RAM slot is Memory socket #2.
• A G450 1.x with increased memory displays, for example:
MEMORY SOCKET #1
------------------
Type : 512MB DDR SDRAM memory module with ECC
Serial Number : 749f5c9f
Manufacture Part Num : D1DI64M724G-A48ID
Faults : No Fault Messages
MEMORY SOCKET #2
------------------
Type : UNKNOWN
Serial Number : UNKNOWN
Manufacture Part Num : UNKNOWN
Faults : UNKNOWN
• A G450 2.x and greater with increased memory displays, for example:
MEMORY SOCKET #1
------------------
Type : 512MB DDR SDRAM memory module
Serial Number : 0550749f
Manufacture Part Num : 9VDDT3272AY-335G4
Faults : No Fault Messages
MEMORY SOCKET #2
------------------
Type : UNKNOWN
Serial Number : UNKNOWN
Manufacture Part Num : UNKNOWN
Faults : UNKNOWN
Replacing a RAM card in the G430
About this task
The G430 has a single RAM slot housing a 256 MB RAM card. If you wish to support an increased
number of announcement files, you must upgrade the G430 memory by replacing the 256 MB RAM
card with a 512 MB RAM card.
The RAM slot is located on the G430 main board. You must remove the G430 cover to replace a
RAM card.
Procedure
1.
Removing the G430 cover.
2. Replacing the G430 RAM card.
3. Replacing the G430 cover.
Removing the G430 cover
About this task
Voltage:
Disconnect the G430 from the external power source before proceeding.
January 2018 Installing the upgrade memory kit in the G450 and G430 Media Gateway 6
To Next Page
Loading...
