Original Operating Manual 1-2013
Error checking
Error code indication
The components of the eBike system are continuously and automatically monitored. When an
error is detected, the respective error code is shown in the text indication (c). To return to the
standard indication, press any button on the operating computer (3) or the operating unit (10).
Depending on the type of error, the drive is automatically shut off, if required. Failures of the
electrical system normaly allow further travelling without assistance in standard bike mode.
However, have the system checked by an authorized Bosch eBike Service before attempting
new trips.
Example: Speed sensor error
Error code explanation
To Next Page
Loading...