EasyManua.ls Logo

Avenger B7057 LONG JOHN SILVER - Raising the Stand Columns; Check for Obstructions; Pre-adjustment Checks; Raise Load with Handles

Avenger B7057 LONG JOHN SILVER
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 10 -
RAISING THE COLUMNS OF THE STAND
12
Ensure the stand will not be obstructed when
raised to the desired height.
Before you adjust the height check the following:
Ensure the stand is correctly set up in working
position and correctly levelled
Ensure the load does not exceed the max load:
120 kg (265 lb)
Ensure the spotlights or extension arms are
correctly balanced and locked
Ensure the stand will not be obstructed when is
raised to the desired height.
Raise the load by turning handles “H” in a
clockwise direction (see fig. 12)
Red button “N” which is the secondary safety lock
will vibrate as you raise the column (DO NOT
PRESS IT DURING RAISING).
Note:
If there are difficulties in raising the columns
check the following:
- Is the load in excess of that specified for the
stand.
- Have any columns been damaged in transit.
- Is there an obstruction (ceiling, balustrade
etc.).
WARNING
DO NOT MOVE THE STAND WHEN THE LOAD
HAS BEEN RAISED.
SOLLEVARE LE COLONNE
DELLO STATIVO
12
Verificare che lo stativo non sia ostacolato nel
sollevamento all’altezza desiderata.
Prima di regolare l’altezza, verificare quanto
segue:
Accertarsi che lo stativo sia correttamente
approntato in posizione operativa e ben livellato
Accertarsi che il carico non superi la portata
massima: 120 kg (265 lb)
Accertarsi che gli illuminatori o i bracci di prolunga
siano correttamente bilanciati e bloccati
Accertarsi che lo stativo non sia ostacolato nel
sollevamento all’altezza desiderata.
Sollevare il carico ruotando le manovelle “H” in
senso orario (vedere fig. 12).
Il comando rosso “N”, che ha la funzione di
blocco di sicurezza secondario, vibra durante il
sollevamento della colonna (NON VA PREMUTO
DURANTE IL SOLLEVAMENTO).
Nota:
In caso di difficoltà nel sollevare le colonne,
verificare quanto segue:
- Se il carico supera la portata dello stativo.
- Se le colonne sono danneggiate in certe
posizioni.
- Se vi sono ostacoli (soffitto, balaustra, ecc.)
AVVERTENZA
NON SPOSTARE LO STATIVO QUANDO IL
CARICO È SOLLEVATO.
N
12
H
H
GB I