This document describes the Avenli Spa, an inflatable hot tub designed for personal relaxation and hydrotherapy. It includes installation, usage, and maintenance instructions, along with important safety information and warranty details.
Function Description
The Avenli Spa is an inflatable hot tub system that provides a relaxing and therapeutic experience through heated water and bubble massage. It consists of an inflatable spa liner, a pump unit that handles heating, filtration, and bubble massage, a top cover, and a ground cloth. The system is designed for easy setup and maintenance, allowing users to enjoy a spa experience at home.
Important Technical Specifications
The Avenli Spa is available in models LL17606USV21 and LL17606USV41, both designed for 4 persons.
- Capacity: 4 persons
- Outer Dimensions: 148 x 148 x 65 cm (58.3" x 58.3" x 25.6")
- Inner Dimensions: 115 x 115 x 65 cm (45.3" x 45.3" x 25.6")
- Water Capacity: 560 L (148 gal)
- Power Supply: 110-120V, 60Hz, 1380W
- Max Heat Temperature: 104°F (40°C)
- Heating Efficiency: 33.8-35.6 °F/h (18.8-19.8 °C/h) at an ambient temperature of 68°F (20°C)
- Test Certificate: CETLus
- GFCI (Ground Fault Circuit Interrupter): Essential safety feature, must be tested before each use.
- Filter Cartridge: Requires regular cleaning (every 150 hours max) and replacement (every 1-2 months).
Usage Features
The spa is designed for user-friendly operation with a control panel that allows for temperature adjustment, filtration activation, and bubble massage.
- Control Panel: Features LED display, heat button, massage button, lock button, and temperature units selector.
- Temperature Control: Users can set the desired water temperature, with a maximum of 104°F (40°C). The heating efficiency allows for a temperature increase of approximately 33.8-35.6 °F/h.
- Bubble Massage System: Activated via the massage button, providing a relaxing bubble experience.
- Filtration System: The pump unit includes a filter cartridge to keep the water clean. The system automatically reminds users to clean or change the filter after 150 cumulative hours of operation.
- Safety Features:
- GFCI Test: A mandatory test before each use to ensure electrical safety.
- Hyperthermia Warning: Important information regarding the risks of hyperthermia, especially when using the spa with alcohol, drugs, medication, or during pregnancy. Users are advised to check with a doctor before use if they have certain health conditions.
- Child Drowning Prevention: Emphasizes supervision of children and attaching the spa cover after each use.
- Electrical Appliance Proximity: Never place an electric appliance within 5 feet of the spa.
- Automatic Shut-down: The bubble massage system has a 30-minute auto shut-down feature.
- Site Selection: Requires a level place capable of supporting over 500 kg/m², sheltered from sun and bad weather, clean, free from sharp objects, and devoid of aggressive vegetation.
- Inflation: The spa is inflated using the pump unit and an inflation hose, typically taking about 10 minutes.
- Water Filling: The spa should be filled with water to the indicated level after inflation and smoothing out wrinkles from the bottom.
Maintenance Features
Regular maintenance is crucial for the longevity and safe operation of the Avenli Spa.
- Water Maintenance:
- Water Balance (pH): Must be maintained between 7 and 7.4.
- Water Sanitation: Use active oxygen-based treatment or bromine in a floating dispenser (sold separately). Avoid using the spa if water is heavily polluted.
- Water Change: The spa water should be changed every 15 to 30 days.
- Water Test Kit: Use a water test kit to control water parameters at least once a week.
- Filter Cartridge Cleaning and Replacement:
- Cleaning: Unscrew the filter case, remove the cartridge, and rinse it with a garden hose.
- Replacement: Replace the filter cartridge if it remains dirty and discolored after cleaning, typically every 1-2 months.
- Filter Reminder: The control panel displays "CHG FIL" and sounds an alarm after 150 hours of filtration to remind users to clean or change the filter.
- Drainage:
- The spa can be drained by unscrewing the drain cap and removing the stopper on the bottom.
- After draining, the spa can be cleaned with soap and water.
- The bubbling button can be pressed to blow out water from the jet holes.
- Storage:
- After draining and cleaning, the spa should be wiped dry for 24 hours.
- The valves should be unscrewed to deflate the spa.
- The spa should be folded and stored in its original package in a warm, dry place.
- Repair Kit:
- Small holes or punctures can be repaired using the included repair kit and glue.
- The repair process involves finding the leak, cleaning the area, cutting a round patch, applying adhesive, pressing the patch firmly, and allowing 12 hours for drying.
- Troubleshooting: The manual provides a comprehensive troubleshooting guide for common issues such as the control panel not operating, spa not heating properly, bubble massage system malfunction, water filtration issues, pump leakage, and dirty water. It also lists error codes (E1, E3, E4, E5, E6) with corresponding problems, causes, and solutions.
- Warranty: Avenli warrants its products against defects in material and workmanship for 1 year for the pump and 6 months for the liner, starting from the date of purchase. The warranty requires original proof of purchase and covers repair or replacement of defective products. It does not cover damage from negligence, accident, misuse, improper maintenance, chemical water damage, or unauthorized repairs.
Need help?
To Next Page
General
