1. Fingerprint User: place the fingerprint on the sensor 3 times to register;
X3
2.Password User: input the password, and press # to confirm in 2 times;
X2
***
3. Card User: place the card on the card reader to register;
The default master password is “01234-56789”, once a new master user
is registered in the lock, it will be replaced by the new master user and
cannot be used any more.
The password can be 6 to 10 digits.
Once the registration is finished, please try to use the registered user to
unlock and confirm the registration is successful.
It is suggested to make a record list for the user ID and manager them better.
4
To Next Page
Loading...