AVer CAM520 - Preset & Call Operations

4
Name
Function
6. Preset
 This feature allows user to go to a set position.
 To save the camera at the desired position, press and hold
the preset button until the "saved message" is displayed.
Select preset position button 0 to 9 to save.
 Pressing Preset + Preset Position Button (0 ~ 9) will move
the camera to the saved position.
7. Preset position
Preset position button is used in conjunction with the Preset
button to save positions. There are a total of 0 to 9 saves.
8. Call/answer*
Answer a call or start a call.
9. Enter**
To confirm the selection in the OSD menu.
10. Mute/Unmute
Speakerphone**
Mute/Unmute the speakerphone.
11. Volume up/down**
Adjust volume up or down.
12. Far site camera control***
Press the Far/Near button to control the far site camera for pan,
tilt, or zoom functions.
13. Hang up*
End the call.
* Function requires AVer PTZApp
** Not support for CAM520
*** Future support