21
Home / Sleep Position
Home Position: There are three options: Last operating position/Factory central position/ Preset 0
Sleep Position: There are two options -- Factory sleep position/ Preset 9
If the camera idles for more than 3 minutes, it will enter sleep mode.
ADDR / Protocol/Baud Rate
These settings are related to RS232 functions. Please choose the corresponding value while
connecting with external control panels.
OpenGL
The default setting is Off. If your PC has installed OpenGL, you can get better frame rate and smoother
video quality by turn on it. If your PC is without OpenGL, it will cause video display problem after
enable it.
To Next Page
Loading...
