AVer CAM550 - Page 15

6
5. Zoom In/Out
Increase/Decrease the camera zoom.
6. Preset
The Preset button on the remote
serves 2 functions.
To Save a Preset – Move camera to
desired position. Press and hold the
preset button until you receive the
save message on the screen. Select
preset position button 0-9 to store the
current camera position. Repeat steps
if needed.
To Load a Preset - Press the preset
button and preset position button 0-9
to load a saved camera position.
Repeat steps if needed.
7. Preset Position/Number
Buttons
Preset position buttons are used in
conjunction with the Preset button to
save positions. There are a total of 10
presets.
Press the preset button first and then
press 0~9 for the camera to move to
the saved position.
[Notes]
 Press and hold the number button
“ ” for 1 second to turn on or
off the WDR function.
 Press and hold the number button
“ ” for 1 second to turn on or off
the SmartFrame function.
 Press and hold the number button
“ ” for 1 second to enable or
disable RTMP streaming function.
 Press and hold the number button
“ ” for 1 second to force camera
to enter sleep mode. This will end
any IP or HDMI out video
streaming. To wake up the camera,
press the button or any directional
button for 1 second. This mode is