42
Save Preset
Enable/disable “save preset” function. When applicable, IT personnel can limit end-user access to
change preset points by locking “save preset” function and switching this function off.
When off, user can’t save preset points via IR remote, Hot key, VISCA, and webpage.
Select Setting > Camera > Save Preset > Off or On.
HDMI Screen Layout
To set HDMI output type – Lens 1, Lens 2, PIP 1, PIP 2, or PIP 3.
When select PIP 1, 2, or 3 layout, user can click to switch lens 1 and 2 display position.
To Next Page
Loading...
