14
7. Preset Control
Set up Preset Positions: Adjust camera direction with the navigation
buttons, then enter a preset number (0~255) into the Save to text box.
When finished, click Save.
Switch between Preset Positions: Click on a number button to switch to
the camera preset positions, or enter a preset number into the Go to text
box. When finished, press Enter on your keyboard.
Cruise: Select from the drop-down list to turn on or off Cruise function.
Click to configure Cruise Setting. For more details, please refer to
<Cruise Management>.
To use Cruise Function:
1. Make sure all the preset positions have been pre-configured.
2. Click Add, enter a preset position number in the Go to text box
for the camera to switch to, and a dwell time in Stay time(s) text
box.
3. When finished, click Save. You may add more than one cruise
route.
4. To delete a cruise route, click to select a route, then click
Remove.
Record: Record your camera live view with the cyclical recording function.
1. Go to Management > Recording to set up the storage location, storage
size and cyclical recording time. For more details, please refer to
<Recording>.
2. After setting up, click on the Control Panel to start recording.
To Next Page
Loading...
