AVer TR320 - Scheduling

38
Scheduling
Set up schedule to power on/off or reboot cameras. The schedule will execute
until you disable it.
[Notes] This function is not available for CAM Series.
 Make sure all devices are connected via Ethernet cable in order to power on.
 Remember to turn on Wake On Lan (WOL) of PTC500s, PTC115, TR530 and
TR320 before power on.
 Keep PTZ Management running to control the camera on /off/reboot.
To create a schedule:
1. Go to Management > Scheduling > Add Schedule.
2. Configure the schedule settings and click Save to add this schedule to the
Scheduling list.