35
Recording
You can record each camera views in the system using this page.
[Notes] This function is not available for CAM Series.
1. Go to Management > Recording.
2. Click and select a directory to restore camera recordings.
3. Enter the maximum storage capacity in the Storage Size (GB) field to set up
the recording capacity. When the recording size reaches the maximum
storage capacity, the camera will start loop recording to overwrite the oldest
recordings with the new ones.
4. Select Enable from the drop-down list to turn on camera recording; select
Disable to stop.
5. Select a Cyclical Recording Time from the drop-down list set up the duration
time of camera recordings. When finished, click Save.
To Next Page
Loading...
