AVer VB342 - Remote Controller; Remote Controller Functions

4
Remote Controller
1
4
7
9
10
12
2
3
5
6
8
11
Button
Function
1. Power
Turn on/off the VB342 unit.
2. Audio input
Switch audio input sources.
3. Camera direction control
Use the direction button on the
remote to control the direction of
the camera. Press the direction
button to move the camera or press
and hold for continuous pan or tilt.
4. Preset position hot key
Press one time to go to preset 1
position; press two times for preset
2 position; and three times for
preset 3 position.
5. Preset
 Press to get back to “home”
position that user has set.
 Move camera to desired
position. Press and hold the
preset button until saved
message is displayed on
screen. Then, select preset
position button 1~3 to save
current camera position.
6. Mute/Unmute
Speakerphone
Mute/Unmute the speakerphone.
7. Zoom in/Zoom out
Increase/Decrease the camera
zoom.
8. Volume up/down
Adjust volume up or down.
9. Preset position
 Press “Preset” button +
“Preset position” button to set
the preset position.
 Press the button to the preset
position.
10. Call/answer*
Answer a call or start a call.
11. Hang up*
End the call.
12. Battery compartment cover
Press (toward down) it to open for
battery installation.
* Function requires AVer PTZApp