English-3
Installation
1. Connect the camera to power outlet.
Power cord
Power adapter
2. Connect the camera to the speakerphone
using the included compatible cable.
[Notes]
Both speakerphone and camera ports are
marked in blue.
Remove the back cover of the speakerphone to
connect the speakerphone cable.
Speakerphone
cable
3. Connect the necessary cables.
[Notes]
Secure the USB and RS232 cables with
attached screws. RS232 cable is an optional
accessory; please purchase from the AVer.
Make sure the cable is well connected to the
connector on the camera before securing the
cable.
To Next Page
Loading...