Avery Berkel XS 100 User Manual

XS Series Retail System Scales
Operator Instructions
ABR35-000606 issue AA
©Avery Berkel, 2015 All rights reserved
No part of this publication may be reproduced, stored in an elect
ronic retrieval system, or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise without the prior written consent of the copyright owner, or as
permitted by law or under licence. Full acknowledgment of the source must be given. Avery Berkel is a division of ITW Limited. This
publication was correct at the time of going to print and is supplied without liability for errors or omissions. Avery Berkel reserves the
right to alter without notice the specification or design of any product or service at any time.
Trademarks and acknowledgements
Avery Berkel is a registered trademark in c
ertain jurisdictions. All brands and product names used within this document are trademarks
or registered trademarks of their respective holders
IMPORTANT
When programming or configuring the equipment you must ensure tha
t you comply with all relevant standards and legislation. The
example settings given in this book may not be legal for trade with the public.

Avery Berkel XS 100 Specifications

General

Readability	1 g / 0.002 lb
Platform Size	230 mm x 190 mm
Display	LCD
Material	Stainless Steel
Protection Rating	IP65
Power Supply	Battery or AC adapter

Summary

Chapter 1 Safety

General Safety Warnings

Covers safe installation, use, cleaning, training, ergonomics, and EMC compliance.

Chapter 2 About Your Machine

2.2 Programming

Details machine configuration, PLU codes, and manager mode setup.

2.4 Installation and Levelling

Function Keys Overview

Key Function Descriptions

Explains the operation of tare, fix, cancel, print, enter, override, and other keys.

2.8 Machine Security

Covers security levels and logging on/off procedures for authorized access.

Chapter 4 Serving Customers

4.1 Product Selection (PLU)

Explains four methods to quickly recall product data using Product Look Up numbers.

4.3 Label and Receipt Modes

Details operation in label mode and variations within receipt mode (PoS, Checkout).

4.4 POS Modes and Functions

Describes PoS-Disabled, PoS-Enabled modes and payment handling.

Promotions and Price Adjustments

4.7 Barcode Scanning

Weight Override and Voiding Transactions

4.10 Tare Operations

Explains how to use tare functions for containers in weighing.

4.13 Receipt Operations

4.14 Tax Management

Explains tax rates, inclusive/exclusive tax, and net value tax reporting.

4.15 Payment Processing

Details how customers pay for goods using various methods and multiple payments.

Foreign Currency and Customer Accounts

4.16 Cash Drawer Operations

Details functions like adding float, paid out, and pick up using the cash drawer.

Refunds and Product Returns

4.18 Electronic Funds Transfer

Explains performing transactions using an EFT card terminal.

Chapter 5 Pre-pack Operations

5.1 Pre-pack Operation Keys

Introduces keys for altering dates, prices, verifying labels, and re-packing products.

5.2 Setting Up Pre-pack Mode

Product and Label Printing in Pre-pack

5.6 Tare Usage in Pre-pack Mode

Details tare display options and using free tare for containers.

Advanced Tare Options

Re-Price and Re-Pack Operations

5.13 Pack Runs

5.14 Stock Mode Operations

Explains how to use stock mode for inventory management, excluding customer interaction.

5.15 Back Calculation Methods