Avery Dennison AP4.4_5.4 - Accessory Installation; Installing Internal Rewinder Module

PRINTER SYSTEMS ASIA
PRINTER SYSTEMS ASIA
Installing an Internal Rewinder
Internal Rewinder /
Dispenser
Internal Rewinder /
Dispenser
[47] Motor and gear axle of the rewinder module
[46] Mandrel (B) of the rewinder module
[45] Upgrade kit ”Internal Rewinder Module” (A5551):
A Rewinder module
B BLDC output stage board
C Data bus (A3967, only required for ”AP 5.4 basic”)
D Cable harness (A3966, only required for ”AP 5.4 basic”)
E Ribbon deflection axle
39