Need help?Do you have a question about the Avery Dennison AP4.4_5.4 and is the answer not in the manual?
General| Print Resolution | 300 dpi |
|---|---|
| Print Technology | Thermal Transfer |
| Power Requirements | 100-240 VAC, 50-60 Hz |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Humidity | 20% to 85% non-condensing |
| Media Type | tag stock |
| Media Thickness | 0.0025 inches (0.0635 mm) to 0.010 inches (0.254 mm) |
| Connectivity | Ethernet |
| Memory | 4 MB Flash, 8 MB SDRAM |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Media Width | 0.79 in (20 mm) to 4.65 in (118 mm) |
Function and adjustment of the print head pressure.
Step-by-step guide for cleaning the printer's print head.
Instructions for cleaning the printer's print roller.
Steps for replacing the printer's feed motor.
Steps for replacing the printer's toothed belt.
System requirements for operating the Cutter 2000.
Configuration of the cutter stepper motor and jumper settings.
Detailed pin assignments for Cutter 2000 connectors.
To Next Page