Avery Dennison Monarch ADTP1 User Manual

o
|
1
2
o
|
3
2
1
1
2
3
1
2
2
1
TCADTP1SG Rev. xx
2014 Avery Dennison Corp. All rights reserved.
Monarch® Products
TCADTP1SG Rev. AA 12/14
2014 Avery Dennison Corp. All rights reserved.
Monarch® Products
Monarch® Products
Monarch® Products
114226
Cleaning Pen
11796120, 11796130, 11796140
Ribbon Take-up Core
120350
Cleaning Strip
126738
USB Cable
CLICK

Avery Dennison Monarch ADTP1 Specifications

General

Print Resolution	203 dpi
Connectivity	USB, Serial, Ethernet
Maximum Print Length	39 inches (991 mm)
Print Technology	Thermal Transfer
Print Method	Thermal Transfer or Direct Thermal
Maximum Print Width	4.09 inches (104 mm)
Supported Media Types	Die-cut
Media Width	1.0 to 4.25 inches
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Operating Temperature	41 to 104°F (5 to 40°C)

Summary

Printer Components and Accessories

Initial Printer Connections

Power Connection

Connect the printer to a power source using the provided cable.

USB Connection

Connect the printer to a computer using the USB cable.

Loading Media and Ribbon

Load Media

Insert the label roll correctly into the printer's media path.

Install Ribbon

Mount the ribbon roll onto the designated spindle.

Secure and Close Cover

Ensure media and ribbon are properly seated and close the printer cover.