Need help?Do you have a question about the Avery Dennison Monarch Tabletop Printer 1 and is the answer not in the manual?
General| Connectivity | USB, Serial, Ethernet |
|---|---|
| Print Method | Direct Thermal/Thermal Transfer |
| Print Technology | Thermal |
| Print Resolution | 203 dpi (8 dots/mm) |
| Max Print Speed | 6 inches per second (152 mm per second) |
| Print Speed | Up to 6 inches per second (152 mm per second) |
| Power Requirements | 100-240 VAC, 50-60 Hz |
Configures the printer for various label and tag types.
Adjusts print speed (IPS) for optimal quality and performance.
Overview of adjustments for print, supply, margin, cut, dispense, and backfeed.
Adjusts the vertical position of the printed image on the supply.
Adjusts print darkness for barcode readability and printhead life.
Configures the serial data transmission speed (bits per second).
Setup and installation procedures for USB printer connection.
Step-by-step guide for installing the printer drivers.
Instructions for installing the virtual serial driver for USB.
Configures the printer's Internet Protocol (IP) address.
Configures the subnet mask for network settings.
Configures how the printer obtains an IP address (Static or DHCP).
Sets the network name (SSID) for wireless connection.
Procedure to format the printer's flash memory.
Updates firmware or databases using a USB thumb drive.
Introduces RFID setup methods: Easy Setup and Advanced Setup.
Quick RFID configuration using inlay type and position.
Chooses the correct RFID inlay type for printer setup.
To Next Page