Avery Dennison Monarch Tabletop Printer 1 - Setting the Configuration Packet Mode; Setting the Error Retry Mode

6-6 System Administrator’s Guide
Setting the Configuration Packet Mode
The printer can respond to or ignore all online configuration packets.
Note: We recommend changing your host’s data stream, but if that is not possible,
enable this option.
Use caution if ignoring online configuration packets, because the printer may
need the configuration for proper operation!
Select To
Disabled The printer responds to all online configuration packets.
Enabled The printer ignores all online configuration packets. This is useful
when you cannot change your host’s data or when you want the
printer to operate as specified through the printer’s menu.
Setting the Error Retry Mode
The printer either reprints the job or discards/cancels the job after a supply error is
cleared. Depending on your environment, you may not want jobs reprinted.
Select To
Disabled The printer discards the job that was in process and does not reprint it.
Enabled The printer reprints the job that was in process when the error occurred.