Avery Dennison Monarch Tabletop Printer 1 - Channel (Ad-Hoc Only)

5-4 System Administrator’s Guide
Channel (Ad-Hoc Only)
This option selects the channel on which your network devices communicate. All devices
must be on the same channel to communicate. Other radio devices such as Bluetooth
wireless devices, microwave ovens, or 2.4-gigahertz cordless phones may operate on the
same channel as your network. Channels 1-11 are available. Use the channel for ad-hoc
mode. In infrastructure mode, the channel is negotiated with the access point and this
setting is ignored. Use this setting in ad-hoc mode only.
Select To
1
Use channel 1.
2
Use channel 2.
3
Use channel 3.
4
Use channel 4.
5
Use channel 5.
6
Use channel 6.
7
Use channel 7.
8
Use channel 8.
9
Use channel 9.
10
Use channel 10.
11
Use channel 11.
Note: Make sure all network devices are set to the same channel.
If you have problems connecting to your network, change the channel to at least
three channels lower or higher than any other wireless networks within range.