A-4 System Administrator’s Guide
Accessories
♦ 928™ Stacker ♦ 933 Cutter
♦ 935™ External Rewind ♦ 938™ Verifier
♦ 939i™ Intelligent Keyboard ♦ USB mini keyboard (160001)
♦ Supply Guide Extension (131438) ♦ Tear Bar (131439)
♦ USB cable (126738) ♦ Serial Cable: 9-pin to 9-pin (126716)
♦ 203 dpi (128933ST)
300 dpi (130226) Replacement
Printhead
♦ Packet Reference Manual –
Programmer's manual (TCADTP1PR)
♦ Printhead CLEAN-STRIP (120350) ♦ Printhead Cleaning Pen (114226)
Factory-Installed Options
♦ Internal Ethernet with
MonarchNet2™
♦ 802.11a/b/g/n wireless with
MonarchNet2™
♦ Peel mode ♦ Peel mode with internal liner take-up
♦ Cutter Ready ♦ Cart Ready for use on Mobile
Workstation
♦ RFID Encode ♦ RFID Encode and Verify
(not available with peel mode)
♦ 300 dpi printhead ♦ ADK script programming for special
applications
Shipping the Printer
If you need to ship the printer to a different location and do not have the original
packaging, use the following part numbers to order the appropriate packaging materials.
1. Remove the ribbon roll, if one is loaded.
2. Remove the supply roll, if one is loaded.
3. Close the printhead by pressing down on the thumb well until it clicks into place.
4. Place the printer in the original box and secure with packaging material. Make sure
the printer is adequately packed to avoid damage during shipment.
70101 Shipping carton (1) 70107 Foam Support, Horizontal (1)
70102 Bottom Pad (1) 70108 Foam Support, Vertical (1)
70103 Top Pad (1) 70109 Angleboard (4)
70110 Scored Insert (1) 00054301 Poly Bag (1)
To Next Page
Loading...
