Avery Dennison Monarch Tabletop Printer 1 - Setting Defaults

Setting Defaults 6-1
SETTING DEFAULTS
This chapter explains how to select the monetary sign, secondary sign, decimal
places, slashed zero, power-up mode, prompt set, imaging errors, ignore configuration
packets, error retry, and adjust the image length. This chapter also explains how to
format flash, check the available flash memory, and pack flash memory.
You can set your printer configurations to fit your daily operation, using either the offline
menus or the online configuration option. After an option is selected in the online
configuration or offline Setup Menu, the option is saved when the printer is turned off.
The monetary formatting options are in the table below.
Option
Choices
Default
Monetary sign
None, $ Dollar, £ Pound, ¥ Yen,
Deutsche Mark, F Franc,
P Peseta, L. Lira, Kr Krona,
Markka, Shilling, Rs Rupee,
Ruble/Rubel, Won, Baht, ¥ Yuan, € Euro
$ Dollar
Secondary
Sign
No/Yes No
Decimal
Places
0/1/2/3 2
Slashed Zero No/Yes No
Power-up
Mode
Online/Offline Online
Prompt Set
English, Français, Deutsch, Español-ES, ニホンゴ,
Português, Italiano, Svenska, Español-MX, Dansk,
Nederlands, Polski, Türkçe, 简体中文, Français-CA
English
Numeric
Format
Default, Arabic-Indic, Eastern Arabic Default
Flash Storage Disabled/Enabled Disabled
No Image
Error
Disabled/Enabled Disabled
Ignore Config Disabled/Enabled Disabled
Error Retry Disabled/Enabled Enabled
Adjust Length -30 to 30 0
Sleep Time 0 to 240 60
The monetary sign, secondary sign, and decimal places options are used in conjunction
with option 42. Refer to the Packet Reference Manual for more information.
Note: The settings for monetary sign, secondary sign, slashed zero, and decimal places
apply when a format is downloaded. Changing the settings does not affect
batches already in the printer.
You can also select None if you do not want a monetary sign to print in price fields.
6