Avery Dennison MONARCH 9417+ - Printer Setup and Configuration; Setting the Time and Date; Printing Labels

2-EN
Setting the Time and Date
1. Press the Tools button then select Admin.
2. Enter the Admin password and press Enter.
The default password is 1234.
3. Press Set Time/Date.
4. Change the time and date as needed then press OK.
Printing Labels
1. Turn on the printer.
2. Press the product button of the label to print.
3. Select the number of labels and press Enter. To print one
label, press Enter.
4. Labels print for the selected product.
Note: To print a Use First label, press the Tools button, Use
First, then select the number of labels to print.