How to fix an Avery Dennison Printer that does not feed?
If your Avery Dennison Printer is not feeding, try the following: Use a fully charged battery. Completely close the supply cover. Ensure the supply is loaded correctly. Check the platen roller for jammed labels and make sure the pinch roller is in place.
What to do if my Avery Dennison Printer does not print?
If your Avery Dennison Printer is not printing, try the following: Ensure you are using a fully charged battery. Make sure the supply is loaded correctly. You may also need to clean the printhead.
What to do if my Avery Dennison Printer partially prints?
If your Avery Dennison Printer partially prints on the supply and does not respond to the keypad or trigger, try these steps: Ensure the supply is loaded correctly, replacing it if necessary. Clear any supply jams. Clean the printhead. Switch to a fully charged battery.
Why does my Avery Dennison Printer have voids or prints too lightly?
If the print quality from your Avery Dennison Printer has voids or is too light, try these solutions: Ensure the supply is loaded correctly and that the supply cover is completely closed. Use a fully charged battery. Clean the printhead. Check the supply for any damage or defects.
What to do if the display on my Avery Dennison Printer does not turn on?
If the display on your Avery Dennison Printer does not turn on, verify that the power is on and switch to a fully charged battery.
General| Model | Pathfinder 6057 |
|---|---|
| Category | Label Maker |
| Print Technology | Thermal Transfer |
| Print Resolution | 203 dpi |
| Print Speed | Up to 4 ips |
| Battery | Rechargeable Lithium-Ion |
| Supported Materials | Paper, Synthetic |
| Connectivity | USB |
| Power Supply | External Power Adapter |
Instructions for charging the printer's main battery using approved chargers.
Step-by-step guide on how to remove and replace the main battery.
Crucial safety precautions and guidelines for handling and charging the main battery.
Instructions for loading labels and tags, covering different print modes like Peel and Non-Peel.
Procedure to calibrate the printer's supply for accurate label feeding and printing.
Instructions on how to use the built-in scanner to capture bar code information.
Procedure for cleaning the printhead to ensure print quality and prevent damage.
Procedure for safely removing jammed supplies from the printer.
A table listing common printer issues and their corresponding solutions.
A list of common error codes and their meanings with suggested actions.
Information on how to obtain assistance for unresolved issues or unlisted error codes.
To Next Page
