A
SPECIFICATIONS & ACCESSORIES
Specifications
Width –
3.3” (84 mm)
Dimensions:
Length – 9.84” (250 mm)
Height – 7.9” (201 mm)
Weight – 2.0 lbs. (908 g)
Shipping Weight – 5.9 lbs. (2.6 kg)
Printhead:
1.89" (48mm/384 dots) (203 dots per inch)
Printing:
Thermal direct (no ink /ribbon)
Print Speed:
Up to 5" (127 mm) per second
Memory:
128 MB DDR RAM; 256 MB NAND Flash
Battery Type:
7.4V Lithium-Ion
3.6V Lithium-Ion (internal)
Battery Recharge
Time:
1 – 3 hours, depending on the charger used.
Widths: 1.2", 1.5", and 2.0" (30mm, 38mm, and 51mm)
adjustable between 1.2 – 2.0” (30 mm – 51 mm)
Supply Sizes:
Lengths .55" – 8.0" (14mm –203mm)
Peel mode supports .785" (20 mm) or greater lengths.
Non-Peel mode supports .55" (14mm) or greater lengths.
Operating
Temperature:
40°F – 110°F (4°C – 43°C)
Humidity
(Operating & Storage):
5% – 90% non-condensing
Accessories
This section lists some of the accessories available for your printer and their part numbers. For
more accessories, refer to the Accessories List available on our Web site.
Part Number Description
M09462 Single-Station Battery Charger
M09465 Four-Station Battery Charger
114226 Cleaning Pen
Network
Control Module
Use one module with up to four 6055 Docking modules
M06054
Docking Module
Conn
ects to the Network Control Module. Holds the printer, charges the
battery while inside the printer, and allows Ethernet communication with
the printer.
M06055
125859 USB Cable
12009502 Extra Battery
Specifications & Accessories A-1
To Next Page
