25
BULB REPLACEMENT
Note:
Before changing the lamps, make sure that the appliance is unplugged.
,Protect you hands by wearing gloves to avoid any injuries.
Replacing the LED lamps
1. Switch the unit off and pull out the plug
2. Open the inner glass and take out the aluminum filters
3. Loosen the buckle screws with a screwdriver and take down the hood body from the cavity.
4. Use the screwdriver to take out the screws that connects the panel to the the cabinet.
5. Unpin the lamp wire and the switch wire.
6. Remove the panel assembly and with screwdriver, remove the screws from the lamp mounting
bracket.
7. Push the light out of lamp mounting bracket cavity.
To Next Page
Loading...
