Note:
During this process, if it prompts that WiFi
configured successfully but the binding page does not
pop up, please return to the “Add Camera” page, to select
“Others
→ IP Camera→ Search in LAN” or “Manually
add” to bind the camera
3.2 Other ways of adding
If no QR code can be found on the body of the device,
please choose the 'Others' to add the camera.
Method One:
①
Enter the APP, click the "+" on the top right corner,
choose ‘Others’
→
IP Camera.
② Choose ‘Wireless Installation’, please refer to the ‘
Wireless configuration add instructions’ and the APP’s
voice prompt to finish the setting.
Note: Please refer to the ②③④ steps in the 'Scan
QR code' above to finish the ‘Wireless Installation’
settings.
To Next Page