Need help?Do you have a question about the AVGO NOXOX and is the answer not in the manual?
General| Brand | AVGO |
|---|---|
| Model | NOXOX |
| Category | Security Camera |
| Language | English |
Learn how to download the Eyecloud mobile application via website, app store, or QR code.
Register an account using email/password or third-party login for app access.
Guide to adding the camera by scanning a QR code, starting with camera power-up.
Enter the app and scan the QR code on the camera's body to initiate pairing.
Provide WiFi network password after camera prompts for configuration.
Keep phone and camera close, maximize volume, and click 'Send' on the app.
Wait for success prompt, then click 'Add Camera' on the app to finish.
Add camera via IP Camera option, then choose Wireless Installation.
Connect camera to router via network cable and select 'Search in LAN' or 'Manually add'.
Find available cameras on the same router using the 'Search in LAN' feature.
Input camera's UID or scan QR code, then enter the password to bind the camera.
In the app, navigate to WiFi Setting to connect to a network and enter the password.
After setup, remove the network cable; the camera will restart.
View basic info, set wireless connection, modify password, upgrade, reboot, or delete.
Configure night vision, mirror view, light, brightness, and contrast.
Check capacity, set schedule, motion detection recording, and audio.
Enable/disable motion detection alarms, set notification type and time frame.
Hold the reset button for 10 seconds to reset the camera. Default password is 888888.
Supports 2.4G WiFi; password < 16 chars, no special characters. Upgrade APP.
Check IR function, IR LED, reset camera, or upgrade firmware for night vision issues.
Adjust picture quality to HD mode via web interface or clean the camera lens.
To Next Page