1. Inspect unit before each use.
2. The metal compressor cylinder will heat up during operation. Do not touch
the cylinder head or fittings with bare hands during or immediately after use.
3. Only hold the unit by the carrying handle.
4. Do not over-inflate. Always confirm the tire pressure with a trusted tire
pressure gauge that features a built-in air bleeder valve.
5. Do not use the inflator when the vehicle is moving.
6. Do not leave the working inflator unattended.
7. Do not put the inflator on or near sources of direct heat or expose to
direct sunlight.
8. Do not operate the inflator in or around flammable environments.
9. Do not kink or block the air hose while the inflator is working.
10. Do not use the inflator if bent, broken, melted, burnt, wet or any of the
components are damaged.
11. Do not use the inflator on high pressure tires such as those used on
commercial vehicles, agricultural or specialist vehicles.
12. The inflator is not waterproof.
13. Make sure that the cables and hoses connected to the inflator will not
interfere safe operation of vehicles.
14. This inflator is not designed for continuous use. Operation over an
extended period of time will overheat the unit and damage the inflator. It
should not be used continuously for more than 15 minutes. After 15 minutes
of continuous use, turn it off and let it cool for at least 10 minutes before
resuming operation.
15. If the inflator is making an abnormal sound, or the temperature of the
unit is too high, turn the power off immediately and let it cool for at least 10
minutes before resuming operation.
16. The infiator contains no user serviceable parts. Do not open.
17. The compressor was permanently lubricated during assembly. Do not
add oil or any other lubricant.
SAFETY INSTRUCTION
1
To Next Page
Loading...