Avigilon 1.0C-H4PTZ-DP45 - Page 21

Avigilon 1.0C-H4PTZ-DP45

29 pages

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

The video output signal is determined by the camera flicker control setting. When the camera flicker control is

set to 60 Hz, the video output signal is NTSC. When the flicker control is set to 50 Hz, the video output signal is

PAL. Use the Camera Installation Tool to configure the camera’s flicker control in the Image and Display setup.

Connecting to External Devices 16