1. To set the protocol, select either Unicast or Multicast in the RTSP Stream URI area then click Apply.
2. To watch the camera’s live video stream from an external video player, click Generate RTSP Stream URI.
a. Copy and paste the generated address in to your video player. DO NOT open the live video
stream yet.
b. Add your username and password to the beginning of the address in this format:
rtsp://<username>:<password>@<generated RTSP Stream URI>/
For example: rtsp://admin:admin@192.168.1.79/defaultPrimary?streamType=u
c. Open the live video stream.
Accessing the Still Image URI
In the Compression and Image Rate page, you can access the last still image frame the camera recorded.
l To access the still image, click the link in the Still Image URI section.
The last recorded frame of video from the camera’s primary stream is displayed. You can choose to save or print
the image directly from the browser.
Motion Detection
On the Motion Detection page, you can define the green motion detection areas in the camera’s field of view.
Motion detection is ignored in areas not highlighted in green.
To help you define motion sensitivity and threshold, motion is highlighted in red in the image panel.
NOTE: This motion detection setting configures pixel change detected in the camera's field of view. If you are
configuring an Avigilon™ video analytics camera, you will need to configure the detailed analytics motion
detection and other video analytics features through the Avigilon™ Control Center Client software. For more
information, see the Avigilon Control Center Client User Guide.
Accessing the Still Image URI 15
To Next Page
Loading...
