Privacy Zones
On the Privacy Zones page, you can set privacy zones in the camera’s field of view to block out areas that you
do not want to see or record. The camera supports up to four privacy zones.
1. To add a privacy zone, click Add. A privacy zone box is added to the video image.
2. To define the privacy zone area, perform any of the following:
a. Drag the bottom or right side of the box to resize the privacy zone.
NOTE: Privacy zones can only be rectangular in shape.
b. Click the center of the box then drag to move the privacy zone.
c. Click the X at the top right corner of the gray box to delete the privacy zone.
3. Click Apply to save the privacy zone settings.
4. If you are using a PTZ camera, a list of privacy zones is available at the bottom of the page. When you
click one of the privacy zones, the camera moves and highlights that privacy zone in the image panel.
Storage
On the Onboard Storage page, you can enable the camera’s Onboard Storage feature and download recorded
video directly from the camera.
Privacy Zones 17
To Next Page
Loading...
