and-downloads/) and complete the following procedure:
1. Click Browse and locate the downloaded firmware file.
2. Click Upgrade. Wait until the camera upgrade is complete.
Device Log
The Device Log page allows you to view the camera’s system logs and the camera access logs.
1. In the Type drop down list, select either Access Logs or System Logs.
2. In the Minimum Log Level drop down list, select the log messages you want to see.
3. In the Maximum Number of Logs drop down list, select the number of log messages you want displayed
each time.
4. Click Update. The logs are displayed below.
24 Device Log
To Next Page
Loading...
