Need help?Do you have a question about the Avigilon 2.0-H3-D1-IR and is the answer not in the manual?
General| Camera Type | Dome |
|---|---|
| Environment | Indoor/Outdoor |
| Power Source | PoE (IEEE 802.3af) |
| Video Compression | H.264, MJPEG |
| Ingress Protection | IP66 |
| Resolution | 2 MP |
| Day/Night | Yes |
| Mount Type | Surface |
| Operating Temperature | -30°C to 50°C (-22°F to 122°F) |
| Sensor Size | 1/2.8" CMOS |
| Lens | 3-9 mm, F1.3, P-Iris |
Details critical safety warnings, precautions for electrical hazards, and usage restrictions like indoor-only operation.
Explains FCC compliance requirements and user responsibilities regarding radio frequency interference.
Provides instructions for disposing of the product according to local environmental laws and recycling guidelines.
Covers manual content, specifications, and the right to change information without prior notice.
Clarifies licensing, ownership of industrial design, patents, and trademarks related to the product.
Illustrates the camera's exterior, detailing the dome cover, tamper-proof screws, and cable entry.
Details the camera's bottom features, including mounting holes and the serial number tag.
Highlights the front components like adjustment controls, ports, and status LEDs.
Shows the rear of the camera, specifically noting the SD card slot.
Explains the IR illuminator ring for low-light scene illumination.
Lists essential tools for installation and the items included in the camera package.
Provides a sequential list of procedures required to install the dome camera.
Details procedures for removing the dome cover and physically mounting the camera to a surface.
Guides on connecting network, I/O, and power cables for camera operation.
Explains how to assign an IP address and access the live video stream of the camera.
Covers aiming the camera and optional configuration for onboard storage.
Details re-installing the dome cover and performing the final focus adjustment.
Instructions for connecting an external 12 VDC or 24 VAC power source to the camera.
Details how to connect external input/output devices using the camera's I/O terminal.
Explains how to connect external microphones, speakers, and video monitors using the audio/video connector.
To Next Page